I run across these vintage glass snack sets at the thrift stores. All. The. Time.
The day I picked this one up, I had at least 40 to choose from. It was a regular glass-a-palooza.
They were made by Hazel Atlas, Federal Glass, Anchor Hocking and probably every other glass type company back in the day. Every self respecting mid-century hostess had her glass snack set and a glass punch bowl in her party planning arsenal.
I decided I wanted to repurpose my snack set into a snack set for the birds. Real birds, not china ones with sparkly eyes.
A place where a bird could sit and relax, have a little nosh and chat with a few friends. Doing so, all the while, in the lap of 1950's luxury.
How To Make A Vintage Snack Set Bird Feeder
(This post contains some affiliate links for your convenience. You can read my full disclosure policy here.)
Supplies:
- Vintage glass snack set
- Piece of ½" wide copper pipe - mine was roughly 3 ½ feet long (found in the plumbing dept)
- A ½" copper C X FPT adapter (found in the plumbing dept)
- Waterproof epoxy - I used J-B Weld MarineWeld
- Glass Glue - I used Loctite Glass Glue
- Tomato stake or similar stake to pound into the ground (has to be thin enough to fit inside the copper pipe)
Instructions:
Depending on where you buy the pipe, it may come in the correct length already. If not, have the ever helpful plumbing department specialist (who worked at Taco Bell last week) cut the pipe to length for you. I wanted mine to sit just over my peony bushes, so 3 ½ foot worked for me.
Wash and thoroughly dry glass tray and cup.
Apply the J-B Weld to the rim of the larger part of the copper adapter and adhere to the bottom of the tray. Let dry thoroughly.
Apply the Loctite Glass Glue to the bottom ring of the cup and adhere it to the designated cup area of the tray (the trays have indented areas to keep your beverages away from your cucumber sandwiches).
Let dry thoroughly.
Note: I used two different glues because the LocTite Glass Glue is great for adhering glass to glass (cup to saucer), but not so much for adhering metal to glass (pipe to saucer), so I used the J-B Weld to adhere the copper adapter to the bottom of the plate. I didn't want the whole thing to come crashing down onto the ground when one of those fat robins sat on it.
If you like, you can drill a small hole in the bottom of the cup so excess water can drain from the seed cup. You will need a Glass And Tile Bit Set for this. Totally optional as you can just as easily change out the birdseed if it gets too wet.
Fill the cup with seeds.
Pound stake firmly into the ground and slide copper pipe over the stake.
Slide your snack plate with copper adapter over the top of the pipe.
I also added water to the tray area, so they could have a little sip or swim while they were there.
Then sit back and watch your birds have a fancier lunch that you are having.
And for all you bird lovers out there, I just used the flowers to pretty up the photos. Totally not necessary.
Your birds won't hate you if you leave out the flowers.
OK, get off the computer and feed those birds!
If you liked this post, you may like these also
Nikki
How do you keep the seed from molding when it rains? Is there anyway for some type of holes with mesh in the cup? Do you have to take apart to dump rain water and wet seeds?
Mary
I use the plates of vintage snack sets to hold small potted plants on windowsills. They are just the right width for my windowsills. And they wash up beautifully when soil or muddy water spills on them.
Pam
That's a fabulous idea!
Cheri
Thank You FOR SHARING 👍🏼♥️Very Cute 🥰 I Have Seen the Jelly Put on A Tray This Is SOOO Cute WITH The Seed 😊G-d♥️Bless
Olive
Brilliant! Love it.
Sherry@Back2Vintage
We must be on the same wavelength! I have been thinking about doing a post about the many different ways to use snack sets. Making a set into a bird feeder/waterer is a super duper idea and not one I had considered. Thanks for the shout out and I guess I had better get busy on that post!!! Oh, love your photos!!! The birds will love the flowers, too!!!
Dawn WeCallItJunkin
This is just gorgeous, Pam! I love it, and I think your use of the clear set was really a good idea, because the pretty garden and flowers really stand out. Thanks so much for the mention, too! Happy Mother's Day to you 🙂
Faye
Really cute idea Pam! I may have to make a couple now!
Curtains in My Tree
OMGosh I am working on a glass bird feeder however out of just the plates and flower vases.
Yours looks very pretty
I was wondering how you got it to stick in the dirt with breaking it? LOVE it !!!!!!!!!!
Pam Kessler
It's the tomato stake. If you pound it in first you just slide the copper pipe over it like a sleeve. It was one of those plastic/resin type tomato stakes.
Robin Johnson
Pam this is your cutest project yet. I love it.
The Speckled Hen Cottage
Very cute and charming, just like your little blue bird!!! The luncheon crowd will love it!!! And yes, a well stocked and diverse cache of adhesives is a crafter must~~~
Into Vintage
Looking forward to a live action shot when your first diner arrives -- I too see these hostess sets all the time and now they have a new purpose in life thanks to you. I was also unaware that burrito folding skills transferred to plumbing! 🙂 And yes, my home glue collection is rivaled only by my random-gallons-of-paint collection.
Jenny Harris
What a sweet little project! Love it!
Laurel@ChippingwithCharm
So VERY pretty! Your birdies will be eating like QUEENS 🙂
Lynnie CottageGalstyle
Very cute! I've been wanting to do something similar and yours came out so day nice.
Hugs, Lynnie
ANNE
That is the most beautiful feeder I have ever seen! What a great idea! Love this!